ENG
3.1 Configuring Access
SECTION 3.1
The Default Access Code is
NOTICE
1 2 3 4 5 6
Your new Lockly Guard
Access Code
can be any combination of
4 to 10 digits.
Once a
new Access Code is entered, the
Default Access Code
of
123456
would be deleted. This
model supports up to 10 passcodes. If connected to the Secure Link Wi-Fi Hub (sold sepa-
rately), it can store up to 18 passcodes that can be shared with guests and configured with
different permissions. To learn more about the different access codes, visit:
www.support.lockly.com/faq/accesscodes/
9
There are a total of
five (5) buttons
on the keypad as shown
in the example image to the left. The numbers in each button
may differ than what is shown on your device than what is
displayed here.
To enter your required digit, just simply press the circle where
your number is shown. You do not need to press the actual
number as anywhere within the circle will suffice.
The button on the bottom is the
OK
button. You will be pressing
this button when you are done entering your
Access Code
.
OK Button
