ENG
3.3 Adding an Access Code
SECTION 3.3
While in
Programming Mode
, select
“1PG”
to add an Access Code. If you are not in
Programming Mode
, please see
Section 3.2
to enter
Programming Mode
.
After pressing
“1PG”
press
“1AD”
and select
"Pd"
to add an
Access Code
.
Enter your new
4 to 10 digit Access Code
and press when
you are finished. You will then re-enter the code to confirm
your new
Access Code
.
Remember, just touch the digit you need within the circle
around each 3 numbers. There is no need to touch the exact
location of the number. For example, based on the example
image to the left, if you need
“1”,
you can touch the
upper
left
button. For
“6”,
you would touch the
upper right
button.
11
