ENG
4.1 Unlocking with Access Codes
Lockly Guard Smart Lock can be unlocked using multiple ways - via your stored
Access
Code
,
registered fingerprint
, smartphone with
Bluetooth
, or the
physical key
supplied with
your lock.
OK Button
Three consecutive wrong attempts will put Lockly Guard in “Safe Mode”. (See Section 4.6)
Lock
your Lockly Guard by pressing the
OK Button
or by brushing your hand across the
screen anytime when the door is closed. After unlocking, The smart lock will also auto-lock
after 30s.
Slide your hand across the screen to activate the
keypad.
Enter your
4 to 10 digit Access Code
followed by
the
OK
button. Press
OK
anytime to reset if you
entered the wrong digit.
If the
Access Code
entered is correct, the door will
unlock. If the
Access Code
entered is incorrect,
Lockly Guard will
flash red light.
Hold OK Button (3 sec)
You may toggle between two types of keypad
displays to enter your
Access Code.
The
fixed digit
version and the
PIN Genie
version (Recommended).
Press and hold the
OK Button
for 3 seconds to toggle
back and forth between the two keypads.
(Sample display shown only)
PIN Genie
Fixed Digit
25
SECTION 4.1
