ENG
29
4.6 Safe Mode - Overview
Lockly Guard will enter
Safe Mode
when three (3) consecutive wrong
Access Codes
are
entered within 5 minutes. When in
Safe Mode
, the lock status icon will start to flash.
To disable
Safe Mode
, you must unlock the door using the correct fingerprint or enter the
correct
Access Code
twice in a row. Activate the keypad by pressing and holding for
3 seconds.
Once the screen is activated, enter the correct
Access Code
carefully twice, pressing
after every time.
If you enter the wrong code, the keypad will then be disabled for
10 minutes
.
Countdown Prompt
(Displayed in Minutes)
Will start with 10 and
countdown until 0.
You will see a
“10”
on the screen, notifying the number of minutes that the keypad is
disabled for. After
10 minutes
, you may attempt to enter the correct
Access Code
to
unlock the door. After the second incorrect attempt to unlock the lock with the wrong
Access Code
, Lockly Guard will disable the keypad for
20 minutes
, displaying a
“20”
on
the screen. After the third wrong attempt to unlock the door with the correct
Access
Code
, the screen will be disabled for
30 minutes.
(Example A and Example B above).
Note:
In order to conserve power, the countdown prompt will only be displayed for 3
seconds. You can reactivate the screen by sliding your hand across the screen.
Example A
Example B
SECTION 4.6
