17
1
2
AE
Secure the lock interior with 3 screws
INSTALLING THE LOCK INTERIOR (N)
Step 6
Make sure the cable is
away and not tangling
with the spindle
C
Plug the cable into the interior side of the lock
making sure you match the orientation of the
plug by matching the red side on the plug with
the red side on the lock. Secure the connection
by ensuring that the connector is snapped in
and inserted tightly.
REMOVING CONNECTOR
When removing the
connector from the lock make sure to press
the tab to the release from the socket. Carefully
pull from the plug. Avoid pulling by the wires,
doing so may result in damage to the connector
and/or lock.
Align the spindle
C
to the lock interior
and attach the Interior lock to the Interior
mounting plate.
While you are doing so, gently push some
of the excess cable through the rectan-
gular hole into the door.
Place the remaining cable against the
interior side of the lock interior so the lock
interior sits securely onto the mounting
plate.
AE
X
C