SECTION 3.2
9
3.2 Entering Programming Mode
To end
Programming Mode,
press the
Program
button anytime.
Programming Mode
will automatically exit if the keypad is inactive for more than thirty (30) seconds.
After entering
Programming Mode,
you should
see the screen as displayed to the right on your
Lockly Guard keypad. Follow the following steps to
add, delete, or check your
Access Codes.
Add Passcode
Mode
Number
Delete Passcode
View Passcode
Program Button
To enter
Programming Mode,
remove the
battery compartment cover on the interior
side of the Lockly Guard to expose the
Reset
and
Program
buttons.
Simply press the
Program
button to enter
programming mode.
Note: Program button
will be disabled once
synced to a smart phone. Configure all settings
via synced smart phone. Access Codes previously
added by Programming mode will be cleared.