SECTION 3.4
11
Once you have selected the Access Code you want to delete,
Lockly will ask you to confirm deletion by showing you the Access
Code you are deleting, in this example, 1 3 5 7 9 0.
Press to delete, or to cancel.
There are two incidents where your
Access Code cannot be deleted.
NOTICE
3.4 Deleting an Access Code
While in Programming Mode, select
“2DE”
to delete an
Access Code.
If you are
not in
Programming Mode,
please see
Section 3.2
to enter
Programming Mode.
After pressing
“2DE”
press
“Pd”
to
delete an Access Code.
Active Access Codes will then be
displayed on the screen in sequence
from left to right, top to bottom.
In the example shown on the right,
the Access Code displayed is
1 3 5 7 9 0 .
Rotate through different Access
Codes shown by touching any
number on the screen. If you find
the Access Code you want to
delete, simply
hold the OK button
for 3 seconds.
(Continue on next
page)
Example Only
OK Button