SECTION 4.8
27
4.8 Rain Mode
Like other digital electronic products water can trigger to activate the touch-
screen and fingerprint sensor which may cause the batteries to drain. To protect
the lock and extend battery life, you can setup your Lockly Guard to enter Rain
Mode to shut off keypad and fingerprint reader whenever rain or water is detect-
ed.
Activate this feature on the LocklyPro app. While you are within the Bluetooth
range or remotely connected thru Wi-Fi hub (Secure Link), go to
Settings > Rain
Mode
and toggle the button to turn ON.
When RAIN MODE is ON, the keypad
and fingerprint sensor cannot be used.
Unlock via LocklyPro App, or physical key,
Rain Mode auto exits every 30-mins and
re-enters if water or rain is still present.
If you are using the LocklyPro app, you
will be notified when Lockly Guard
entered rain mode and it be recorded
in your access history.
IMPORTANT
If you have not yet connected your device to
LocklyPro App, follow below steps to activate
the rain mode feature:
RAIN MODE ON
1. Long press to enter fixed
digit keypad.
2. Enter
access code +234+
.
3. You will hear a short beep and
Bluetooth indicator flashes green
once Rain Mode is ON.
example: 234 +
RAIN MODE OFF
1. Long press to enter fixed
digit keypad.
2. Enter
access code +890+
.
3. You will hear a long beep and
Bluetooth indicator flashes green
once Rain Mode is OFF.
example: 890 +