6
SECTION 2.6
When the battery is in seriously low condition,
Lockly Guard
will make continuous
beeping sounds in addition to the flashing low battery icon on the touch screen.
You should replace batteries
immediately
to avoid your smart lock from
shutting down.
When your smart lock low-battery warning alert finally dies, you will have 3 chances
to unlock your smart lock either by a password, APP or fingerprint. If the unlock was
successful, the low-battery warning alert will be on for 1 minute. After which, the
smart lock will go to dead-battery mode and will lock auto lock in 5 seconds and
the screen will display a low-battery icon.
Connect the USB plug to a power bank
or any
5V >0.5A
power supply. It normally
takes
15 secs
to boot up the lock. Once
Lockly touchscreen is activated enter
your
Access Code
. Do not removed the
USB plug yet until you have successfully
unlocked the door. After have successfully
unlocked, batteries should be replaced
immediately.
2.6 Low Battery
Mirco USB
Backup
Power
Key Hole
Key Cover
USB Socket
Dead Battery
Condition
Indicator
Solution
Low Battery
Replace batteries immediately
to avoid battery failure.
Lockly
Guard
can still operate up to 300
cycles in low battery condition.
When there is no
display and sounds;
and screen is non-f
unctional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a micro USB port
to power up the lock to tempo-
rarily activate the lock.
Battery Icon on the
display keypad will
light up to indicate
low battery.
Touchscreen