Lockly PGD778F, Installation Manual

*This hole (O) is for the optional Slotted Barrel 

Extension provided for stabilizing your lock. It 

will require drilling extra hole on your door 

(See template as provided). Alternatively,  

you may use the double-sided adhesive 

tape provided which serves the same 

purpose if you do not want to drill a hole. If 

you drilled a hole, securely tighten the post 

with a flathead screwdriver by turning it 

clockwise before mounting on your door.

M

O

B

Peel paper off the 

Adhesive tape

3: Place the exterior assembly to door by

inserting the torque blade on a vertical

position to the lockset cross hole. Guide the

cable to the side of the lockset. Secure the

exterior assembly with adhesive strips.

2: Before placing the exterior assembly on 

the door, make sure the torque blade is in 

vertical position and the hook is extended.

1:  To secure Exterior Assembly of lock, peel the cover off the adhesive strips

Vertical

Hook is 

extended

Torque blade in vertical position

Cable goes to the

side the lockset

5

INSTALLING THE EXTERIOR ASSEMBLY(B)

Step 2