1: Check the mounting plate alignment
to your door hole before you peel of the
cover off the adhesive strip.
4: After securing the mounting plate,
use the key to ensure hook locks and
unlocks smoothly (no binding or rubbing).
IMPORTANT: when finished, leave the
hook extended and remove the key
before proceeding to the next step.
2: Place the mounting plate on the
interior side of the door. Guide the
cable to the opening ear on the side
of mounting plate and make sure the
torque blade is at the center of the
mounting plate.
(2X)
If you have drilled a hole on the top,
please secure the hole with screw. Put
inside a red circle . Skip this if no hole was
drilled.
Secure the cable
to the lower left
notched hole.
3: Insert and tighten by hand 2 screws
located on the left and right of the blade.
Check alignment and tighten with screw-
driver until mounting plate is securely
placed on door.
6
INSTALLING THE INTERIOR ASSEMBLY (F)
Step 3
G
G
Remove key when finished
Leave deadbolt extended
E
G
E
Summary of Contents for PGD778F
Page 1: ...HOOK SMART LOCK MORTISE EDITION INSTALLATION GUIDE PRO...
Page 3: ...meetlockly LOCKLY Connect with us...
Page 15: ...12 PRO IMPGD778F20200820 We re here to help help LOCKLY com...
Page 16: ...13 PRO For the latest version of this manual please visit the link below http LOCKLY com help...
