8
SECTION 3.1
3.1 Configuring Access
The Default Access Code is
NOTICE
1 2 3 4 5 6
How to Use the Keypad
There are a total of
five (5) buttons
on the keypad as shown in the example image above. The numbers
in each button may differ from what is shown on your device than what is displayed here.
To enter your required digit, just simply press the circle where your number is shown. You do not need
to press the actual number as anywhere within the circle will suffice.
The last button on the right is the
OK button.
You will be pressing this button when you are done
entering your
Access Code.
We recommend pairing the Safe to your smart phone to manage your access
codes. Section 3.1 - 3.9 refers to locks not paired with a smart phone. Once paired
with a smart phone, the Program button will be disabled.
Your new Lockly
Access Code
can be any combination of
6 to 8 digits.
Once a new Access Code
is entered, the
Default Access Code
of
123456
would be deleted. A maximum of 100 sets of Access
Codes can be stored for use at any given time. To add more than 100 sets of Access Codes, you
must delete an existing Access Code before adding a new code.
OK Button
NOTICE
