13
SECTION 3.4
NOTICE
3.4 Deleting an Access Code (Continued)
Once you have selected the
Access Code
you want to delete, Lockly will ask you to confirm deletion
by showing you the
Access Code
you are deleting, in this example,
1 2 3 4 5 6.
Press to
delete,
or to cancel.
There are two incidents where your
Access Code cannot be deleted.
Only one Active Access Code
No Access Codes Set
(1) There There are no
Access Codes
set. (2) The factory default
Access Code
cannot be deleted.
There is only one (1)
Access Code
saved in the Safe. At least one code must be registered. Please add
another
Access Code
before attempting to delete the existing code.
