SECTION 4.1
22
4.1 Unlocking with Access Codes
Slide your hand across the screen to activate
the keypad.
Enter your
6 to 8 digit Access Code
followed
by the
OK
button. Press
OK
anytime to reset
if you entered the wrong digit.
If the
Access Code
entered is correct, the
Safe will unlock. If the
Access Code
entered
is incorrect, Lockly will beep twice.
Five consecutive wrong attempts will put Lockly in “Safe Mode”. (See
Section 4.7)
If you need to lock the Safe, close and press the top cover.
You may toggle between two types of keypad displays to enter your
Access Code.
The
fixed
digit
version and the PIN Genie version (Recommended). Press and hold the
OK Button
for 3 seconds to
toggle back and forth between the two keypads.
(Sample display shown only)
PIN Genie
Lockly can be unlocked using multiple ways - via your stored
Access Code, registered fingerprint,
smartphone with
Bluetooth,
or
physical key
supplied with your safe.
OK Button
Fixed Digit
Hold OK (3 sec)
NOTICE
