Set the Power Rate in cents
per kW·h for the digital Power Meter
Set CO2 emissions in pounds per kW h for the digital Power Meter
To Reset the Cumulative Figures
¢
·
1.
In
display, press and hold the ENTER button for 3 seconds to enter the setting of power rate in cents per kW h. The
first figure will begin to flash
2.
Press the DISPLAY button to scroll through the digits. Once you are happy with the digit selected, press the ENTER
button to select it. Once selected the next figure will begin to flash
3.
Follow step 2 to complete the selection of the other digits
4.
After the last digit is selected, the new power rate is set and will flash two times. Then the meter will return to $
display, showing the total cost at the new power rate
1.
In
display , press and hold the ENTER button for 3 seconds to enter the setting of CO2 emission in pounds per
kW h. The first figure will begin to flash
2.
Press the DISPLAY button to scroll through the digits. Once you are happy with the digit selected, press the ENTER
button to select it. Once selected the next figure will begin to flash
3.
Follow step 2 to complete the selection of the other digits
After the last digit is selected, the new CO2 emission is set and will flash two times. Then the meter will return to
CO2-lbs display, showing total CO2 emissions in pounds at the new CO2/kW h rate.
In the Hours display, press and hold ENTER button for 3 seconds, the triangles pointing to
, ,
,
begin to
flash together with 6 figures of zero. The meter will return to Hours display after the release of the ENTER button.
$
CO2-lbs
kW h $ CO2-lbs Hours
·
·
·
·
