background image

  

 

 

www.pclocs.com.au    www.lockncharge.com  

 

INSTRUCTIONS:  

PUTNAM 18C CHARGING STATION

 

 

 

 

 

 

Congratulations on your purchase. 

Follow these instructions for easy and fast set-up of your Putnam 18C Charging Station.  

For video instructions, go to 

https://vimeo.com/284290388

  

 

 

 

 
 
 
Warranty: 
For more information on warranty please visit: 
www.lockncharge.com/warranty 
www.lockncharge.com/eu/warranty 
www.pclocs.com.au/warranty 

 
 

Disclaimer: 
This information is the intellectual property of IWS Global Pty Ltd and may not be distributed, duplicated or copied in part or full without the written permission. Since 
the use of this information, the equipment connected and the conditions by which any IWS Global product is used is beyond the control of IWS Global, it is the 
obligation of the owner and/or user to determine the correct and safe use of any equipment and product. To the extent that the law permits, any liability which may be 
incurred as a result of the use or future use of a product manufactured or sold by IWS Global is limited to the cost of repairing or replacing the failed product or 
component at the discretion of IWS Global either within, or outside of warranty periods, and does not extend to any loss or damage which may be caused as a 
consequence of misuse or failure of the equipment or product or the information contained herein. IWS Global shall not in any event be liable for economic loss of 
profits, indirect, special, bodily injuries or consequential damages.

 

 

Specifications and images are for illustration purposes only. Final product may differ and is subject to change without notice. 

 

PC Locs, LocknCharge and the Padlock device are Trademarks of IWS Global Pty Ltd.  

Copyright IWS Global Pty Ltd, May 2019. 

 

 
 
 
 
 
 
 

Summary of Contents for PUTNAM 18C









Reviews: