17
lococookers.com
CARE AND MAINTENANCE
BURNER REMOVAL AND CLEANING:
Before removing and cleaning burners,
ensure the following:
• Control knob is in OFF position and
griddle is completely cool.
• LP cylinder and regulator are removed
from griddle.
• Batteries are removed from burner box
and ignitor.
1. Rotate feet on cooktop to unlock from burner
box, then lift and remove cooktop and lid.
Check burner tubes for insects and insect
nests. A clogged tube can obstruct the gas
fl
ow and can result in a
fi
re beneath the
appliance. Prevent blockages by inspecting
and cleaning burner tubes regularly.
CAUTION
2. Remove rear hex nut from heat sensor (front
hex nut remains in place). Remove screw and
hex nut from electrode. Be careful not to bend
electrode wire tip or crack ceramic electrode
shaft.
Burner
1/8” (3.2 mm) Gap
When reassembling electrode, ensure a 1/8”
(3.2 mm) gap between electrode tip and burner.
Electrode tip should point directly to a burner
port hole.
Electrode
