18
STORING YOUR GRIDDLE:
• Ensure that control knob is in the OFF
position.
• Clean and dry all surfaces.
• Coating the burners lightly with cooking oil
will prevent excess rust.
• Season the griddle surface.
• If the griddle is to be stored indoors, remove
the LP cylinder from the regulator and store
the cylinder outdoors in a well-ventilated area
away from direct sunlight. Cover the griddle
and store in a cool dry place.
• If the griddle is to be stored outdoors, use
a griddle cover for protection from the
elements.
CARE AND MAINTENANCE
4. Remove two screws from each burner
support. Lift back of burners upward and to
the rear of the burner box, sliding burners
away from valves. Carefully remove heat
sensor and electrode from burner bracket.
5. Check burners for cracks or large holes.
If burners are damaged contact customer
service for replacement.
Scrub all residue and dirt from outer surface
of burners.
Clean/open clogged port holes with a sti
ff
wire, such as an opened paper clip.
Clean inside of burner tube with compressed
air or a garden hose with high-pressure
nozzle. Allow burner to dry completely.
6. Follow steps in reverse order to reassemble
burners in burner box.
When the burners are reassembled, make
sure to properly align burners with valve
ori
fi
ces. Doing this is critical for maximum
performance and e
ffi
ciency.
CAUTION
