background image

5

lococookers.com

•  Use caution when in close proximity to 

this appliance. Falling or tripping near the  
appliance may result in the splashing or 
igniting of hot cooking liquids and potentially 
cause personal injury or property damage.

•  Never drop food or accessories onto the 

cooking surface. Lower food and accessories 
slowly onto the cooking surface in order to 
prevent splashing. When removing food from 
the appliance, care shall be taken to avoid 
burns from hot cooking liquids.

•  Use caution when placing anything on the 

cooking surface while the appliance is in 
operation.

•  The pressure regulator and hose assembly 

supplied with the appliance must be used. 
Replacement pressure regulators and hose 
assemblies shall be those speci

fi

 ed by the 

appliance manufacturer.

•  Keep the cooking area adjacent to the 

appliance clear of debris and free of anything 

fl

 ammable or combustible.

• Never attempt to attach this appliance to the 

self-contained LP gas system of a camper, 
trailer or motor home.

•  Check burner/venturi tubes for insects and 

insect nests and clean if necessary. A clogged 
tube can lead to a 

fi

 re beneath the appliance.

•  Do not store or use gasoline or other 

fl

 ammable 

liquids or vapors within 25 ft (7.6 m) of this 
appliance.

•  Do not alter the appliance in any manner. Do 

not use the appliance until it is completely 
assembled and all parts are securely fastened 
and tightened.

•  Do not build this appliance into any built-in or 

slide-in construction. This could cause a 

fi

 re 

or an explosion that can damage property and 
cause serious bodily injury or death.

• Use only factory-authorized replacement 

parts. The use of any part that is not factory-
authorized can be dangerous.

WARNINGS

•  Failure to raise the side shelves while igniting 

the burners, or not waiting 5 minutes to allow 
gas to clear if the burners do not light, may 
result in an explosive 

fl

 are-up.

•  To protect against electric shock, do not 

immerse cord or plugs in water or other liquid.

•  Unplug from the outlet when not in use and 

before cleaning. Allow the appliance to cool 
before putting on or taking o

  parts.

•  Do not operate and outdoor cooking gas 

appliance with a damaged cord, plug, or 
after the appliance malfunctions or has 
been damaged in any manner. Contact the 
manufacturer for repair.

•  Do not let the cord hang over the edge of a 

table or touch hot surfaces.

•  Do not use this appliance for purposes other 

than intended.

• When connecting, 

fi

 rst connect plug to the 

appliance, then plug appliance into the outlet.

•  Use only a Ground Fault Interrupter (GFI) 

protected circuit with this appliance.

•  Use only the power supply cord supplied by 

manufacturer.

•  The manufacturer has properly located the 

burners with respect to the ori

fi

 ces to allow the 

appliance to burn su

  ciently. Please do not 

attempt to adjust the burners. They are preset 
to the factory speci

fi

 cations.

Summary of Contents for SmartTemp LCG2ST2C26

































Reviews: