29
lococookers.com
STORING YOUR GRIDDLE:
• Ensure that all control knobs and the LP tank
valve are in the OFF position.
• Disconnect the regulator from the LP tank
valve.
• Clean and dry all surfaces.
• Coating the burners lightly with cooking oil
will prevent excess rust.
• Season the griddle surface.
• If the griddle is to be stored indoors, remove
the LP tank from the cart and store the tank
outdoors in a well-ventilated area away from
direct sunlight. Cover the griddle and store in
a cool dry place.
• If the griddle is to be stored outdoors, use
a griddle cover for protection from the
elements.
CARE AND MAINTENANCE
4. Remove one screw from the back of each
burner. Lift back of burners upward and to the
rear of the
fi
rebox, sliding burners away from
valves. Carefully remove heat sensor and
electrode from burner bracket.
5. Check burners for cracks or large holes.
If burners are damaged contact customer
service for replacement.
Scrub all residue and dirt from outer surface
of burners.
Clean/open clogged port holes with a sti
ff
wire, such as an opened paper clip.
Clean inside of burner tube with compressed
air or a garden hose with high-pressure
nozzle. Allow burner to dry completely.
6. Follow steps in reverse order to reassemble
burners in
fi
rebox.
When the burners are reassembled, make
sure to properly align burners with valve
ori
fi
ces. Doing this is critical for maximum
performance and e
ffi
ciency.
CAUTION
