-- Put the fingerprint (which need to be different from master fingerprint) on the
finger sensor to register for 3 times( each time with one beep)----blue light with 3
beeps mean register successful
(Red light means failure, need to register again with fingerprint. If input failed for
twice, need to add normal fingerprint user from the beginning. )
4.
Add card user
Press setting button---2 beeps with red light
----Input master fingerprint----blue light means verification successful (red light
means verification failed, input correct master fingerprint again.)
---- Put the card on card sensor to register for 3 times( each time with one
beep)----blue light with 3 beeps mean register successful
(Red light means failure, register again with card. If input failed for twice, need to
add card user from the beginning. )
5.
Passage mode setting
Press passage mode button for once--blue light mean setting successful------press
passage mode button again to cancel passage mode
6.
Resetting & Delete user fingerprint/card
Press setting button until 5 beeps with red and blue light blink----all user
fingerprint/card will be deleted (if 2 beeps with red light, deleting is failure.)
