1. Please Observe the Following (continued)
2
1.3 For Your Safety
For safe and successful operation of the unit, read these instructions completely. If the instructions
are not observed, the manufacturer can assume no responsibility.
If Loctite
®
products are not properly handled, damage to health can result!
• Observe general safety regulations for the handling of chemicals!
• Observe manufacturer’s instructions!
Request a safety data sheet for the Loctite
®
product used!
• When working with pressurized air, wear protective glasses!
1.4 Usage
With the Rotorspray 97115, Loctite
®
Products can be applied to the interior surface of
cylindrical parts.
The Rotorspray 97115 is operated in combination with a pneumatic stationary applicator. The
simultaneous control of these units requires the use of a Loctite
®
Controller 97123.
Low viscosity
anaerobic and UV curing adhesives can be applied with the Rotorspray 97115.
The rotorspray is not suitable for cyanoacrylate adhesives that are humidity cured and may
clog the wetting holes of the rotor disc!
