Loctite Hysol 175-SPRAY, Operation Manual

Page 3

2 Description

The Loctite

®

 Hysol

®

 175-SPRAY

and 175-SPRAY-HT

are the highest output, hand-held

industrial spray hot melt applicators available. With its two powerful 250W stainless steel
cartridge heaters, they are capable of dispensing up to 9 lbs.

of molten hot melt per hour,

yet only take 10 minutes to warm up.

Supported by a range of spray adhesive formulations, the Loctite

®

 Hysol

®

 175-SPRAY

and

175-SPRAY-HT

are suitable for most applications - they can even be used with heat

sensitive substrates such as expanded polystyrene and other plastic foams.  Also, the
Loctite

®

 Hysol

®

 175-SPRAY and 175-SPRAY-HT

systems are solvent-free and non-toxic,

so there are none of the environmental problems often associated with other spray
adhesive applicators.

Designed to comply with world wide safety standards, the Loctite

®

 Hysol

®

 175-SPRAY

and

175-SPRAY-HT

also feature a totally enclosed heater housing, and are fitted with thermal

fuse protection.

3 Technical Data

Dimensions (L x H x W):

approx. 11 13/16” x 9 15/32” x 2 17/32”
(Approx. 300 x 240 x 65 mm)

Total weight:

approx. 3 lbs. (1.4 Kg)

Connection cable with mains plug: 10 ft (3 m) long
Operating voltage:

98037/98041: 110-120 VAC 50/60Hz
98057/98059:  230 VAC 50/60Hz

Power consumption:

500W

Heating up time:

10 minutes

Operating temperature:

175-SPRAY approx

. 

356°F (180°C)

175-SPRAY-HT

approx. 383°F (195°C)

Diameter of adhesive inlet:

1 11/16” (43 mm)

Extension cable:

max. 65ft (20 m) long

Wire cross section:

at least 16 a.w.g. (1.5 mm

2

)

Air Supply / Pneumatic

Minimum - 45 p.s.i. (3 bar)
Maximum - 100 p.s.i. (7 bar)