background image

5

8

Warranty

Loctite expressly warrants that all products referred to in this Instruction Manual for item
980127, Zeta

®

7500 Portable UV Spot Lamp (hereafter called “Products”) shall be free from

defects in materials and workmanship. Liability for Loctite shall be limited, as its option, to
replacing those Products which are shown to be defective in either materials or workmanship or
to credit the purchaser the amount of the purchase price thereof (plus freight and insurance
charges paid therefor by the user). The purchaser’s sole and exclusive remedy for breach of
warranty shall be such replacement or credit.

A claim of defect in materials or workmanship in any Products shall be allowed only when it is
submitted in writing within one month after discovery of the defect or after the time the defect
should reasonably have been discovered and in any event, within 12 months after the delivery
of the Products to the purchaser. This warranty does not apply to perishable items, such as
bulbs, fuses, filters, etc. No such claim shall be allowed in respect of products which have been
neglected or improperly stored, transported, handled, installed, connected, operated, used, or
maintained. In the event of unauthorized modification of the Products including, where products,
parts or attachments for use in connection with the Products are available from Loctite, the use
of products, parts or attachments which are not manufactured by Loctite, no claim shall be
allowed.

No Products shall be returned to Loctite for any reason without prior written approval from
Loctite. Products shall be returned freight prepaid, in accordance with instructions from Loctite.

NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED,
MISUSED, NEGLECTED, OR DAMAGED BY ACCIDENT, OR IF THE SYSTEM USED TO
DISPENSE ANY LIQUID MATERIAL OTHER THAN LOCTITE PRODUCTS. 

EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, LOCTITE
MAKES NO WARRANTY OF ANY KIND WHATSOEVER, EXPRESS OR IMPLIED, WITH
RESPECT TO THE PRODUCTS.

ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, 
AND OTHER WARRANTIES OF WHATEVER KIND (INCLUDING AGAINST PATENT OR
TRADEMARK INFRINGEMENT) ARE HEREBY DISCLAIMED BY LOCTITE AND WAIVED 
BY THE PURCHASER.

THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR LOCTITE TO 
THE PURCHASER IN CONTRACT, IN TORT OR OTHERWISE IN THE EVENT OF
DEFECTIVE PRODUCTS.

WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE
UNDER APPLICABLE LAWS, LOCTITE EXPRESSLY DISCLAIMS ANY LIABILITY
WHATSOEVER FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN
CONNECTION WITH THE SALE OR USE OF, OR OTHERWISE IN CONNECTION WITH, 
THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS AND SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER CAUSED BY NEGLIGENCE FROM
LOCTITE OR OTHERWISE.

Summary of Contents for Zeta 7500









Reviews: