E2620 Auxilliary Power Unit User Guide
Description
The E2620 Auxilliary Power Unit (APU) and Monitor is an inverter,
charger, and monitor unit designed to run non-life essential
equipment from an external sealed lead acid battery. The unit is
easy to use and allows equipment to be away from a 120VAC wall
outlet source for a few hours while using on-board power to
operate it.
Features
•
allows mobility away from line power
•
up to 400W of 120VAC pure sine wave power to run non-
life critical equipment
•
~4.6hrs@ 150W, ~2.3hrs@300W, ~1.7hrs@400W (70Ah
battery)
•
overload, undervoltage, and overvoltage protected
•
easy to use single rotary switch controls Off, Standby, Run
•
battery monitor displays internal temperature, battery
voltage, battery guard voltage
•
graceful low voltage warning with bargraph display,
voltmeter, and flashing light allows time to return
•
customizable product and installation
•
includes both inverter and charger connected to battery
for convenient operation
•
thermostat controlled fans
•
environmentally protected
•
battery recharging within 4 hrs
3
This device is not authorized for use with any product where the failure or malfunction of
this device can reasonably be expected to cause injury or death. This device is not
authorized for use in any life support system due to the risk of injury or death.
