7 - Maintenance
7.1 - Emergency stop installation
When your treadmill is delivered with an emergency stop, please note
the following:
The plug of the emergency stop button needs to be placed in the back
connector of the console on the front handrail.
Some emergency stop buttons have a connector for another emergency
stop. You can place the spare dummy there in case you have one
button.
Also make sure that the magnet of the emergency lanyard is connected to the console.Otherwise the
treadmill will not operate.
Maintenance should be carried out on a regular and planned basis. We recommend to check the unit
annually. This may be done by your local dealer. It is also recommended that a record of the service
history is kept for all activities relating to service and maintenance.
Maintenance and all repairs should only be carried out by an authorized agency. The manufacturer will
not be held responsible for the results of maintenance or repairs by unauthorized persons.
The check up and/or technical maintenance must be carried out conform the procedure described in
the service manual of the unit.
Opening of the equipment by unauthorized agencies is not allowed and will terminate any claim to
warranty.
Lode will make available on request circuit diagrams, component part lists, descriptions, calibration
instructions, or other information that will assist authorized service personnel to repair those parts of
the ergometer that are designated by Lode as repairable by authorized service personnel.
8 - Troubleshooting
For a complete overview of possible error message and the solutions belonging to these messages,
please consult the service manual of the ergometer.
9/21
M938904_MANUAL VALIANT 2 PEDIATRIC / VERSION: V1.1 - 2016-08-25
