Connect 32 DR+ - Connect 55
User manual
114
Integrated features
Here you can obtain information on the integrated features of the
TV set.
See the rating plate on the rear of the set for the precise product
designation.
Call Integrated features
HOME:
Calling the
Home
view.
Mark
System settings
,
OK
call System settings.
Mark
Extras
,
go to next column.
Mark
Integrated features
,
OK
call Integrated features
(1
.
Select category (e.g. hardware, software,
etc.),
If necessary, scroll content up/down.
Hardware
Under the Hardware item, you can find the article
and serial number of your TV set, the MAC address
and the chassis type with all existing hardware
components.
Software
Under the item software, the current software ver-
sion and the installed software features of your TV
set are displayed.
Upgrade
Under the item Upgrade you can find the installed
software features with their respective status.
Activated: software feature is installed and can be
used.
Not active: software feature is installed, but can not
be used.
...
Integrated
features
Manufacturer
LOEWE
Serial number 834
Article number
54443W50
Chassis
SL320
CI Plus PRODUCTION
Nicam
DD/DTS
PIP
Digital Recorder (DR+)
Channel 1
A/T/T2/C/C2/S/S2
Channel 2
T/T2/C/C2/S/S2
Wi-Fi module
Integrated features
Back
Here you can obtain information on the integrated features of your TV set.
Move content up and down with the cursor
Hardware
Software Upgrade
Reset to factory settings
Here you can reset some of the settings to the factory default values.
Call Reset to factory settings
HOME:
Calling the
Home
view.
Mark
System settings
,
OK
call System settings.
Mark
Extras
,
go to next column.
Mark
Reset to factory settings
,
OK
call.
Select a category you want to reset,
OK
call.
Select
Start reset
,
OK
call.
Entire TV Set
This resets the entire TV set to factory defaults.
By resetting the entire TV set to the factory default
state, all the settings you made and all stored
stations will be deleted.
Thereafter, an initial installation of the TV set is
carried out again (see chapter
Initial installation
).
Picture/
sound
The current image and sound parameters of your TV
set will be deleted and reset to the factory defaults.
Network
The current network settings of your TV set will be
deleted and reset to the factory defaults.
HDMI
The HDMI setting is reset to the factory settings.
Browser
The current browser settings of your TV set will be
deleted and reset to the factory defaults.
All data stored in the course of use are deleted.
Media data
base
Your current media database is deleted because
the database is reinitialised. The information from
the removable media (USB) and possibly the DR+
archive are then re-read.
The system then automatically performs a system
reset.
...
...
This resets the entire TV set to its factory settings.
Entire TV Set
Network
Picture/
sound
HDMI
Browser
Media data
base
System settings
Extras
(1
The screen graphic displayed is only an example. Depending on the device type, the available hardware/software components may be different.
Summary of Contents for Individual 40 Selection
