Connect 32 DR+ - Connect 55
User manual
120
External devices
(1
Adaptor is available as an accessory (see chapter
Accessories
).
Connecting a DVD recorder to the TV set
A
DVD recorder
has been selected in the
System settings
ט
Connections
ט
AV connecting settings
ט
Device at connec-
tion
AV
.
Switch off all devices before connecting them.
Connect the Scart output of the DVD player to the TV set’s
AV
socket
using the Scart adaptor
(1
. Use a fully equipped Scart cable (available
from your dealer) for this.
If you want to receive and record analogue stations with the receiver
(tuner) built into the recorder, the recorder must be looped into the
aerial cable.
Connect the DVD recorder as shown in the connection example below.
Playback from AV device
Call
AV list
.
Select
AV
,
OK
switch over.
Start playback on the connected device.
Connection example of a DVD recorder
ANT IN
ANT OUT
AV
R
TV
AV
ANT TV
DVD recorder
TV set
8 VIDEO
8 VIDEO
7 AV
7 AV
AV list
Note: If you press for
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.
OK
Connecting PC / Set-top box
You can connect a PC and thus use the TV screen as a monitor.
When connecting a PC or auxiliary device to the
AV
socket of the
TV set, adjust the output signal on your PC first so that it matches
one of the signals in the table in chapter
Technical data
, section
Signals via AV (PC IN) / HDMI
.
Switch off all devices before connecting them.
Connect the device to the TV set’s
AV
socket with a VGA cable and
the VGA adaptor
(1
.
Connect the analogue audio signal of the PC to the VGA adaptor via
the jack plug socket.
Playback from the device
Call
AV list
.
Select
PC IN
,
OK
switch over.
Adjusting the geometry of the PC picture
You can set the position (vertical, horizontal) and the phase position of
your PC. The settings you find under
System settings
ט
Picture
ט
more ...
ט
PC IN - Display
.
Connecting devices with component connection (YPbPr / YUV)
External units with component connection
YPbPr
(often informally
referred to as YUV; see also
Glossary
) can be connected to the
AV
socket of the TV set using two adaptors. In addition to the VGA adaptor,
a component VGA adaptor is required (available from your dealer).
The other units are connected as described in the left column.
Connection example of a PC
VGA
AUDIO
AV
PC
TV set
6 AVS
6 AVS
5 PC IN
5 PC IN
7 AV
7 AV
8 VIDEO
8 VIDEO
AV list
Note: If you press for
at least two seconds to
switch to the selected
channel, the screen
switches off and you will
only hear the sound.
With the button
(green), you can switch
the screen back on and
off.
OK
Summary of Contents for Individual 40 Selection
