Connect 32 DR+ - Connect 55
User manual
22
Initial installation
Setting options for DVB-C reception:
If you have not selected
Cable (DVB-C)
in step
Connect antenna
cable(s)
in the initial installation, proceed to the next section
Setting
options for DVB-S reception
.
If several networks are available via DVB-C, you can
decide which network you want to receive your
channels from.
The normal DVB-C settings are derived from the
selection of the location or network and do not need
to be changed.
Exactly which of the following settings are present is
dependent on which network is selected.
Select network.
OK
Confirm selection.
Proceed to next step.
Select and adapt settings for DVB-C
reception.
Scrambled
stations
You can state whether coded stations are to be
searched for in the search/update.
Select
yes
to save all found scrambled stations.
However, these stations can only be received in
connection with a CA module and the appropriate
Smart Card.
The handling of the CA module is described in the
chapter
System settings
, section
Extras – CA
module
.
Search
method
If you select
Frequency search
here, a search is
performed for all receivable stations.
With
Network search
, only the stations which
the networks supply are searched - either for
all receivable networks or only for the particular
network specified under
Network ID
.
Start
frequency
The DVB stations are only searched for in the
frequency range above the start frequency.
Network
selection
Please state from which network you wish to receive your station.
Note: The newly selected parameter must be confirmed with the button.
Unitymedia
Standard
Network selection (DVB-C)
Back with Proceed with
OK
Please specify whether you want to search for scrambled stations too.
Note: Scrambled stations can only be received with an integrated CA module and additional
card.
DVB-C settings
Scrambled stations
Search method
Start frequency
Network ID
Accept Logical Channel Number
no
yes
Network
search
Frequency search
044.00
MHz
none
00000
no
yes
Back with Proceed with
Settings
Network ID
If you select
none
here, DVB signals of all current
transmitter networks are searched automatically
(recommended for most cable networks).
If, on the other hand, you specify a certain network ID
(necessary in the cable networks of some countries),
only DVB signals of this broadcasting network are
searched for automatically.
Your cable provider has the information you need.
Accept
Logical
Channel
Number
In various countries, digital stations (DVB-C) are
transmitted with a preset channel number per
station, known as Logical Channel Numbers (LCN).
If you select
yes
here, these default channel slots
will be used and the channels of the preferred signal
source will be sorted as per LCN. The stations in the
station list can no longer be shifted.
Proceed to next step.
Summary of Contents for Individual 40 Selection
