Connect 32 DR+ - Connect 55
User manual
76
System settings
Sound
Sound
Calling the sound settings
The selectable menu items depend on the selected station and the
connected sound components.
HOME:
Call
Home
view.
Mark
System settings
,
OK
call System settings.
Mark
Sound
,
go to next column.
Select sound function,
proceed to next column.
Explanations of the sound settings:
Sound mode
Depending on the supplied audio signal of your TV
programme or audio source (DVD, Blu-ray, etc.) you
can select the speakers you want to listen here.
The subwoofer is always active if connected
(exception: listening mode is set to
܃
).
If more audio channels are supplied than the connected
speakers are able to reproduce, the missing speakers can
be added virtually (this case is represented respectively
by brackets).
In the „optimal“ position, always the best quality sound
is output with the ideal number of speakers for the
currently played audio signal.
Optimum
܃
܃
܃
܃
܃
HiFi/AV
amplifier
The momentarily reproduced audio signal is output
with the ideal number of speakers.
Play centre sound or mono (left/right).
Play front sound (L/R stereo).
Play front and centre sound.
Play front and surround sound.
Play front, surround and centre sound.
Play via an external HiFi amplifier. Selection is only
possible if an amplifier has been selected in the
sound components wizard.
Dolby PLII
mode
H e re yo u ca n se l e c t /a d a p t p reset so u n d
characteristics (movie, music, matrix) in case of
Dolby Pro Logic II coded broadcasts.
The
movie
mode is „movie focused“, that is, the centre
sound is dominant, as we are used to it in a movie.
In
music
mode, you can set 3 parameters:
Width
: center sound is mixed with left/right.
Change in dimension:
rear and centre are mixed
with left/right.
Panorama:
distance between the speakers is
increased artificially.
Sound
Sound mode
Sound mode
Sound
adjustment
Sound
adjustment
Volume ad-
justment
Volume ad-
justment
Loudness
Loudness
more ...
Possible sound formats depend on the number of channels
available in the received audio signal. If more audio
channels are supplied than the number of speakers available
then you can create a pseudo mode by selecting the speaker
number which is contained within brackets. If you select
“optimal” then the number of speaker used will automatically,
if possible, match the number of audio channels received, this
normally gives the best sound quality. If a sub woofer is
connected it is always active unless you select mono mode i.e
a single speaker.
Souond pic-
Explanations of the sound settings (continued):
Dolby PLII
mode
In
matrix
mode, the front speakers are „mirrored“
to the rear speakers. Front left is mixed with left rear,
right front with right rear and the centre sound is
distributed to all channels.
The menu item appears when a multi-channel
system (speaker system) is connected and
loudspeakers are simulated (e.g. DVB signal with
2.0 sound, listening mode to 5).
Sound
adjustment
Here, you can adapt preset sound characteristics
of the respective broadcast. Selectable are, e.g.,
Speech, Classical, Pop, Custom music and Film
soundtracks. For personal music and film sound you
can do the settings for pitch and bass sound (high
and low frequencies).
Loudness
Proper boost of bass and treble tones at low volume.
Sound
picture
synchronisa-
tion
If the sound and picture are not precisely in sync,
you may correct this here. Move the mark on the
bar downwards, slowing down the sound compared
with the picture. Move the mark upwards, speeding
it up compared with the picture. Time adjustment
of the sound occurs in steps of 10 ms in each case.
only available for DVB stations.
Volume
adjustment
The volume can differ according to the individual sta-
tions. If the sound is too loud or too quiet in relation
to other stations, adjust the volume.
When the menu is open, you can select the stations
one after another with
P+/P–
and adjust every
single station conveniently.
more ...
call with
OK
.
Loudspeaker/
Headphone
sound
For analogue stations:
Selection options for Mono/ Stereo or Sound 1 or
Sound 2 for bilingual programmes, separately for
the loudspeakers and the headphones.
Auto volume
The volume may vary when receiving stations with
different standards, when switching from station to
station or during commercials.
You can reduce these differences in volume by
selecting auto volume
on
. For music and live broad-
casts you get a better sound spectrum with auto
volume
off
.
Maximum
volume
You can limit the volume adjustment of the loud-
speakers. This prevents selecting a volume which
is too loud.
Maximum
switch on
volume
Set the sound level to be heard after switching on the
TV set with the mains switch or after a power failure.
When switching on the TV set in standby mode, the
volume last used is retained unless it was above this
switch-on level. Otherwise it is limited by this.
Balance
Set stereo balance so that the volume impression is
identical on the left and right.
Summary of Contents for Individual 40 Selection
