Connect 32 DR+ - Connect 55
User manual
90
System settings
Control
Manual update via the Internet
If an Internet connection is available, new software can be downloaded
directly and installed onto the TV set.
Calling Software update
HOME:
Call
Home
view.
Mark
System settings
,
OK
call System settings.
Mark
Control
,
go to next column.
Mark
Software
,
go to next column.
Mark
Software update
,
go to next column.
Mark
Via Internet
,
go to next column.
You will see a message on the screen regarding
data protection.
If you are not in agreement with the relevant data being
passed on:
BACK:
Exit the update process.
The update will then
not
be carried out.
Otherwise: Confirm data protection message by press-
ing
.
The version of the software package that is currently
installed will be displayed.
Proceed
.
The TV set connects to the Internet and scans the
update server for new software.
If a new software version is available after the search, an
on-screen message appears (see right hand column).
If no new software package was found in the search:
BACK: End of wizard
.
...
Start update
In accordance with § 33 of the Federal Data Protection Act (BDSG) we point out
that machine numbers and the installation site of your TV set , as well as the
current updates and the current software status in each case, are processed and
saved by a computer system if you use the button to confirm. This data
ensures that we are always able to provide you with optimal service. All data is
handled confidentially.
If you do not wish this to be the case, please press the button.
SOFTWARE UPDATE WIZARD - Data protection
Proceed with
End with
...
...
Start update
Current software: 1.1.11.0
To load a new piece of software, you first need to search for said software on the
update server. Press the key to start the search.
SOFTWARE UPDATE WIZARD - Current software
Proceed with
Back with
New software package found
Proceed
starts loading of the new software.
Or:
BACK: End of wizard
.
The update will then
not
be carried out.
Load new software package
Only the parts of the software package that are not up
to date will be automatically downloaded from the
Internet and updated.
Each part of the software is downloaded individually
from the Internet and is then programmed.
The total time required for all the software parts to be
downloaded from the Internet is dependent on the
speed of data transfer that is being used.
The total programming process can take up to 50
minutes in total.
Please do
not
switch off your TV set with the mains
switch during the entire loading and programming
process.
After the update, the TV set is automatically powered
off and on again.
Depending on the software loaded, it is possible that
the device may not turn off automatically after the
update. Therefore, please supervise the update
process.
When the TV set is switched on again, a message is
displayed.
BACK:
End of wizard
.
...
...
New software
Proceed with
Proceed with
End with
End with
A new software version was found.
New software: V1.1.14.0 (Current software: V1.1.11.0)
If you now wish to load the new software, press the button. Otherwise
close with the button.
Ensure that the TV set is not switched off at the mains while it is loading the
data.
A new software version was found.
New software: V1.1.14.0 (Current software: V1.1.11.0)
If you now wish to load the new software, press the button. Otherwise
close with the button.
Ensure that the TV set is not switched off at the mains while it is loading the
data.
Start update
60%
...
-NSD3GDKN@CHMF@MCOQNFQ@LLHMFOQNBDRRB@MS@JDTOSN@OOQNWLHMTSDR
in total. Please do not switch off your TV set at the mains during this time.
Note: Depending on the loaded software, it is possible that the device cannot
automatically switch off after the update. Therefore, please monitor
the update process.
-NSD3GDKN@CHMF@MCOQNFQ@LLHMFOQNBDRRB@MS@JDTOSN@OOQNWLHMTSDR
in total. Please do not switch off your TV set at the mains during this time.
Note: Depending on the loaded software, it is possible that the device cannot
automatically switch off after the update. Therefore, please monitor
the update process.
Updating software
The "V1.1.14.0" software is currently being programmed, please wait ...
Start update
Summary of Contents for Individual 40 Selection
