Connect 32 DR+ - Connect 55
User manual
95
(1
for devices in DK, FIN, N or S:
yes
.
System settings
Control
DR+
You can adapt the Digital Recorder to your requirements.
Call settings for the digital recorder
HOME:
Call
Home
view.
Mark
System settings
,
OK
call System settings.
Mark
Control
,
go to next column.
Mark
more ...
,
call other settings.
Mark
DR+
,
go to next column.
Mark desired setting,
go to next column.
Make settings,
OK
confirm setting.
Explanation of the DR+ setting options
Recording
You can set a pre-record and post-record time for
timer recordings made without auto time control.
This minimizes the risk that a part of the broadcast
is not recorded due to the broadcast starting earlier
and/or finishing later.
Factory setting: pre-record time:
1 min
,
post-record time:
5 min
.
Notify
hidden
sections
If an entry has been hidden in an archive recording,
you can get informed by a screen message when
skipping a hidden area.
Factory setting:
yes
.
Jump
distance
Set the standard jump distance (in minutes) used
for jumping forwards or backwards in the movie by
briefly pressing the
or
keys.
Factory setting:
2 min
.
Smart jump
If the „Smart jump“ mode is activated you can
approach a desired place by pressing the
and
buttons alternately and halving the jump width. After
every 3rd jump in the same direction the jump width
is doubled (up to a maximum of 8 minutes).
If
off
is set you always jump the same currently set
jump width (time) with the
and
buttons.
Factory setting:
on
DR+
Notify hid-
den sections
Jump dis-
tance
Smart Jump
Recording
Recording
Recording
subtitles
DR+
Streaming
You may set the pre-record and post-record times here.
...
Serial
recording
tolerance
The serial recording tolerance is necessary to
avoid recording a serial more than once when it is
broadcast more than once a day.
It is only recorded when it begins within the
given time interval (start time +- series recording
tolerance).
Use the numeric button on the remote control to
enter the time (always two-digit for 01 to 60 min.).
Factory setting:
±
30 min
.
Recording
subtitles
Select here whether subtitles are to be recorded for
DVB stations.
Factory setting:
no
(1
.
DR+
Streaming
With this, all the settings are activated to make all
the films on your DR+ archive available to other
LOEWE TVs using your home network (or vice-versa,
e.g. allowing you to use the DR+ archive of other
LOEWE TVs).
See next page for further information.
Summary of Contents for Individual 40 Selection
