- 14
English
Connection
Connecting the Center speaker to the
subwoofer
Thread the speaker cable through the hole in the enclosed speaker cover (A).
One of the two wires of the speaker cable ( C ) is marked black. Connect these
black marked wires with the black terminal on the subwoofer ( wiring according
to the picture on the right) and the black terminal (B) on the speaker. Connect
the unmarked wires with the red terminals. Then press the cover (A) back onto
the satellite speaker.
A
B
C
Position the speakers as described on page 11 or mount the satellite speakers
on the wall with the wall holder or on the optional stand as described in the
respective installation instructions. Before beginning with start-up and opera-
tion, make sure that all the cables are connected correctly.
Start-up and operation
Select the center signal on the subwoofer
Switch not pressed = center via satellite speaker.
Technical Data
Satellite loudspeakers
Dimensions satellite loudspeakers in cm
Speaker
W 6,2 H 15 x D 6,2
Stand
Stand Ø 20 x H 100,5
Weight satellite loudspeakers in kg without/with stand
0,7 / 3,3
Fitting
2x broadband, paper diaphragm, Ø 55mm
Load capacity
30 W (sine) / 45 W (max. music)
Impedance 8
Ohm
Transmission range
150 Hz–20 kHz ± 3dB
Sound pressure
86 dB (1w/m)
Satellite
speakers
ON
Line IN
Power OUT
OFF
Bass Intensity
Center to
System connector
230V~50/60Hz
Surr.
Front
Right
Surr.
Front
Subw. Left
Right Center Left
Slave
Master
R
R
L
C
L
Phase
Min.
Max.
TV
Sat
0
180
Front
left
Front
right
Surround
left
Surround
right
Subwoofer
Center
