- 20
Daily operation
Adjusting the sound
Switching sound on/off
Sound off;
Sound on: Press button again or set volume
V+
.
Setting the volume
V+/V–
Volume louder / quieter.
The volume bar will be shown briefly if no other menu is
displayed.
Call Sound adjustment
Call
Sound adjustment
.
Select sound adjustment by pressing several times.
or:
34
Select sound adjustment.
Other sound settings in volume setting and sound adjustment
➠
As long as the volume bar or the selection of the sound
adjustment is still visible:
Call additional sound settings.
34
Select sound setting,
6
go to the menu line below.
34
Make changes.
Sound settings via the TV menu
➠
In normal TV mode, without other displays.
Call
TV menu
.
34
Select
Sound
,
6
go to the menu line below.
34
Select desired sound setting,
6
go to the menu line below.
34
Make changes.
Explanations of the sound settings:
Playback over the TV speakers, active speakers, Loewe
Auro, Loewe Individual Sound Projector or an external
hi-fi amplifier.
The selection active speakers, hi-fi/AV amplifier or Sound
projector is only possible if these have been logged in in
the audio component wizard. The Auro selection is only
possible if a Loewe DVD Preceiver Auro is connected.
The menu item
Sound via
does not appear if
TV speak-
ers
or
TV sp active subwoofer
is set in the audio
components wizard.
Set sound effects Stereo, Panorama, 3D Surround.
Pano-
rama
gives the stereo sound a virtual base widening.
3D
Surround
converts a stereo signal into a virtual surround
signal.
Speech, Classical, Pop, Custom music and film sound. You
can set the treble and bass for music and movie sound.
Adjust the headphones volume.
Proper boost of bass and treble tones at low volume.
Call with
OK
.
Selection possibility Mono/Stereo or Sound 1 or Sound
2 for two-sound broadcasts separately for speakers and
headphones. Only available with analogue stations.
Reduces volume differences, e.g. for advertisements that
are too loud.
Sound selection for two sound broadcasts.
Determining the maximum volume that can be set.
Specify the volume that is set when switching on the TV
set with the power switch.
If the volume when switching off the TV set into standby
mode is higher than specified here, it is automatically
reduced to the fixed switch-on volume when switching
back on.
The volume can differ according to the individual stations.
If the sound is too loud or too quiet in relation to other
stations, adapt the volume. When the menu is open, you
can select the stations one after another with
P+/P–
and
adjust every single station conveniently.
Set stereo balance so that the volume impression is identi-
cal on the left and right.
Sound via
Sound effects
Sound
adjustment
Headphone
volume
Loudness
more ...
Loudspeaker/
Headphone
sound
Auto volume
AV output
signal
Maximum
volume
Switch on
volume
Volume
adjustment for
current station
Balance
END
Sound adjustment
Sound effects
Volume
24
Headphone volume
Classical
Sound adjustment ...
Speech
off
Pop
Custom music sound
