19
Activation of the Timer
To activate the Timer first proceed as follows:
- select the cooking zone to be programmed;
- select with the keys (+) or (-) (ref.5) a switch-off time;
- a sound is emitted to confirm the ignition and
"00" flashing (ref.6) appears on the timer display.
When the timer is waiting to be programmed, the "00" flashes.
The timer value can be selected between 1 and 99 minutes using the (+) or (-) keys (ref.5),
Keeping the (+) or (-) key pressed, the modification speed increases automatically
so that it is possible to reach the desired time setting as quickly as possible.
- If the time is not selected before 5 seconds, the timer will switch off.
- If the selected time is "00" after 5 seconds, the timer will switch off.
Once the required time has elapsed, the countdown for the selected cooking zone
starts after 5 seconds.
An acoustic signal sounds and the display of the timer and the cooking zone stop
flashing.
The final minute is displayed in seconds.
Changing the Timer setting
When the timer is running, the previously programmed time can be changed at any
time by touching the (+) and (-) keys at the same time and then (+) or (-) to change
the time. The countdown stops while waiting for the new setting.
End of Timer countdown
When the timer has reached the end of the time, the cooking zone switches off
automatically.
The power indicator shows the "H" of redundant heat, the Timer display and the
cooking zone LED start to flash.
A sound is also heard that warns of the end of this function that remains active for 1
minute. The sound can also be stopped earlier by touching the + and - keys at the
same time.
START AND USE
