www.lofrans.com
9
Use the (DOWN) or (UP) key to move around the parameters
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Select with
Select value with
Confirm with
Back Light
By enabling this function it is possible to start the
display luminous intensity programming procedure
(default value 120 seconds).
Select with
Select value with
Confirm with
Light Time
This function allows the user to set the backlight on
time during which the display remains lit after the last
command given (default value 30 seconds).
Select with
Select value with
Confirm with
Keyboard Beep
This function allows the user to enable or disable the
buzzer (emitted each time a key is pressed).
Select with
= Yes = No
Confirm with
Exit
To return to the settings menu.
Confirm with
UK
4.6 Language menu
4.7 Sensor calibration menu
Use the (DOWN) or (UP) key to move around the parameters
Language*
The user may select the display language:
Italian, English, French, German, Spanish, Greek
Select with
Select value with
Confirm with
Exit
To return to the settings menu.
Confirm with
Standard Series Sensor Menu
(magnet and sensor placed on gypsy)
Gypsy Circumference
In this row the user must enter the circumference of the gypsy (in centimetres or inches).
Use the
Table 1
provided to calculate the circumference.
Settable values: centimetres or inches.
Default value, 33 cm.
Select with
Select value with
Confirm with
Exit
To return to the settings menu.
Language
L a n g u a g e
E n g l i s h
E x i t
Gypsy
*When the operator changes the language, the remote control will restart automatically.
4.5 Settings menu
30
