3
Battle Ax OM
Owner Information
Thank you for your decision to purchase a Battle Ax
30 Series Excavator Mulching Head from Loftness. To
ensure maximum performance of your machine, it is
mandatory that you thoroughly study the owner’s manual
and follow its recommendations. Proper operation and
maintenance are essential to prevent injury or damage
and to maximize machine life.
The Loftness Battle Ax is an effective, reliable machine
used for maintaining grass, weeds, brush and trees. For
best results, operate the machine as low to the ground
as possible without the teeth striking ground or other
obstructions. Lifting or tilting the Battle Ax increases the
risk of flying debris. Because of the high speed of the
teeth, the life of the teeth will be reduced if it is operated
in rocky terrain or in areas where many obstacles are
present. Areas to be mowed should be free of debris
such as rocks, bottles, large branches etc. The teeth cut
and pulverize the grass, weeds and brush. The Battle Ax
deposits cut material over the entire width-of cut, which
eliminates bunching or windrowing behind the machine.
Operate and maintain this machine in a safe manner and
in accordance with all applicable local, state, and federal
codes, regulations and/or laws, and in compliance with
on-product labeling and these instructions.
Make sure that all personnel have read this owner’s
manual and thoroughly understand safe and correct
operating, installation and maintenance procedures.
Continuous improvement and advancement of Loftness
products may result in changes to your equipment
that may not be reflected in this publication. Loftness
reserves the right to make product improvements to the
machine at any time. Although great care has been taken
to ensure the accuracy of this publication, Loftness does
not assume any liability for errors or omissions.
Warranty Policy
Be sure to read and understand the Warranty Policy at
the beginning of this manual. It is also important that you
fill out the Warranty Registration form(s) completely with
your dealer so as not to void the warranty.
Serial Number Location
1
2
The machine serial number is shown in the tag (1), and is
also stamped into the machine frame (2).
Always use your model and serial number when
requesting information or when ordering parts.
Owner’s Manual Access
1
The Battle Ax is shipped with a printed owner’s manual.
The manual must be available for all operators. Keep in
a safe, dry location.
To access a digital owner’s manual, use a smart phone
to scan the QR Code (1) located on the motor cover. This
code will link to the Battle Ax owner’s manual on the
Loftness website.
Introduction
Summary of Contents for 41BX30
