LOFTNESS 51CCH Owner'S Manual And Parts Book Download

Page: 15 / 74

Carbide Cutter OM

Safety First

In the owner’s manual and on decals used on the
machine the words

DANgER, WARNINg, CAUTION,

IMPORTANT, and NOTE are used to indicate the
following:

DANgER: This word warns of immediate hazards which,
if not avoided, will result in severe personal injury or
death. The color associated with Danger is RED.

WARNINg: This word refers to a potentially hazardous
situation which, if not avoided, could result in severe
personal injury or death. The color associated with
Warning is ORANGE.

CAUTION: This word refers to a potentially hazardous or
unsafe situation that, if not avoided, may result in minor
or moderate injury. It may also be used to alert against
unsafe practices. The color associated with Caution is
YELLOW.

IMPORTANT: Highlights information that must be heeded.

NOTE: A reminder of other related information that needs
to be considered.

If  Safety  Decals  on  this  machine  are  ISO  two  panel
pictorial, decals are defined as follows:
•   The first panel indicates the nature of the hazard.
•   The  second  panel  indicates  the  appropriate

avoidance of the hazard.

• Background color is YELLOW.
• Prohibition symbols such as and

STOP

if used,

are RED.

Be  certain  all  machine  operators  are  aware  of  the
dangers  indicated  by  safety  decals  applied  to  the
machine, and be certain they follow all safety decal
instructions.  Contact  Loftness  for  safety  decal
replacement.

Loftness

cannot

anticipate

every

possible

circumstance that may involve a potential hazard. The
warnings in this owner’s manual are not all inclusive.

Owner’s Responsibility

Due to the potential danger of flying debris, it is the owner’s
responsibility and is “

ABSOLUTELY MANDATORY that

IMPACT-RESISTANT SHIELDINg” be installed on the
machine to protect the operator.

It is

ABSOLUTELY MANDATORY that all personnel read

and follow all safety precautions before operating the
machine and attachment.

Make sure that all personnel have read this owner’s
manual, and thoroughly understand safe and correct
installation, operation, and maintenance procedures.

Operate and maintain this machine in a safe manner and
in accordance with all applicable local, state, and federal
codes, regulations and/or laws; and in compliance with
on-product labeling and this owner’s manual instructions.

Make sure that all personnel know how to stop the
machine and attachment by disengaging all controls. See
“Mandatory Shut-Down Procedure” on page 6.

Make  sure  the  attachment  is  installed  on  the  machine
correctly  before  being  placed  in  service.  At  regular
intervals  thereafter,  the  attachment  should  be  serviced
in  accordance  with  procedures  outlined  in  this  owner’s
manual.

Safety Alert Symbol

This  message  alert  symbol  identifies
important safety messages on the machine
and  in  the  owner’s  manual.  When  you  see
this  symbol,  be  alert  to  the  possibility
of  personal  injury  and  carefully  read  the
message that follows.

Safety Instructions