7
Installation and Operation
1.
Carefully remove the appliance from the box and ensure heater
exhaust is free from debris and packaging remnants.
2.
Remove all parts and hardware from the carton and replace them on a
clean, soft, and dry surface.
3.
Place unit on floor in desired location.
4.
Make sure the unit’s Power On/ Off switch is switched Off.
5.
Plug the unit into a 15A, 120V outlet. If the cord does not reach, you
may use a No. 14 AWG minimum size extension cord rated for a
minimum of 1875 Watts.
WARNING:
This stove is not to be used on elevated surfaces.
The outlet must be 15A/120V.
Do not attempt to wire your own outlets or circuits. To reduce
the risk of fire, electric shock or injury to persons, always use
a licensed electrician.
Do not use this fireplace if any part of it has become wet.
Immediately call a qualified service technician to inspect the
fireplace and replace any part of the electrical system which
has been wet.
Summary of Contents for SJ15SFB
Page 15: ...15 ...
