L o g a n G r a p h i c P r o d u c t s I n c . , 1 1 0 0 B r o w n S t r e e t , Wa u c o n d a , I L 6 0 0 8 4 To l l F r e e 1 8 0 0 3 3 1 6 2 3 2 w w w. l o g a n g r a p h i c . c o m
6
FRAMER'S
EDGE
MAT CUTTER
MODELS 650, 655 & 660
I. Use a Backing Sheet
For best results ALWAYS use a Backing Sheet when bevel cutting. A Backing Sheet is a
scrap piece of mat board which is at least as long as the mat you are cutting and at
least 4” wide. Your first Backing Sheet is included. The Backing Sheet will need to be
changed periodically. Helpful Hint: Move the Backing Sheet slightly after each cut to
avoid cutting into previous scores that may cause the blade to flare out causing a curve
in your cut.
Fig 9
H. Attach the Movable Stop Arm
Slide the Movable Stop Arm onto scale bar with the leg toward board bottom and
tighten in position.
Fig 8
Fig 8
Fig 9
