background image

Total Trimmer

www.logangraphic.com

G e n e r a l   P u r P o s e   T r i m m e r

For best results use only  

authentic Logan blades

Purchase Date

Model T300

Model T360

Instruction Manual 

Introduction

The Logan Trimmer offers many unique features and durability that make it the best value trimmer/cutter available. 

Capable of handling your most demanding trimming needs, the Total Trimmer is the versatile work-horse trimmer you 

have been looking for. Ideal for trimming difficult materials like PVC foamboard and vinyl, it also easily cuts common 

materials such as films, paper and almost any flexible or rigid materials. Easy to use, ergonomic design, safety 

features and inexpensive cost makes the Total Trimmer a cutter with great features at a great price.
For advice, assistance or replacement parts please contact us at www.logangraphic.com

Summary of Contents for T300

Page 1: ... of handling your most demanding trimming needs the Total Trimmer is the versatile work horse trimmer you have been looking for Ideal for trimming difficult materials like PVC foamboard and vinyl it also easily cuts common materials such as films paper and almost any flexible or rigid materials Easy to use ergonomic design safety features and inexpensive cost makes the Total Trimmer a cutter with ...

Page 2: ...older back Loosen blade holding screw Fig 2 2 Slide blade into slot under Blade label Fig 3 3 Tighten screw rotate blade holder back until plunger pin releases to safety position Depth Setting 1 Determine desired depth setting using Blade Depth Settings chart Fig 4 2 Rotate depth adjustment knob to desired number setting Fig 5 Fig 1 Fig 5 Fig 3 Fig 2 Fig 4 2 Logan Graphic Products Inc 1100 Brown S...

Page 3: ...l 6 Pivot blade down fully until it locks Fig 9 7 Place hand on to cutting handle pull cut ting head down through material until head reaches support bar Fig 10 8 Upon contact with support bar the blade holder will automatically release to safety position Fig 11 Fig 6 Fig 9 Fig 10 Fig 11 Fig 7 3 Logan Graphic Products Inc 1100 Brown Street Wauconda IL 60084 847 526 5515 www logangraphic com Total ...

Page 4: ...quare and squaring arm Fig 13 2 Notice which way squaring arm would have to move to eliminate gap 3 Remove squaring arm and locate two screws inside side slots Fig 14 4 To adjust move each screw equal but opposite directions Only adjust a small amount DO NOT ADJUST Tension Screw Single screw on opposite side 5 Retest squareness Logan Graphic Products Inc 1100 Brown Street Wauconda IL 60084 847 526...

Reviews: