SPACE 2000 (T and M versions) OPERATION MANUAL
32
SERVICE MESSAGES
Service messages guide the user in selecting the right operative sequence during
the enabling of the SPACE 2000 various commands.
N°
MESSAGE
MEANING
1
“ABS”
Indicates the selection of the ABS/INCR key and is used during
simultaneous zero-settings or absolute pre-selection.
2
“SEL. ASSE”
Indicates that the user must select an axis in order to proceed
further.
3
“F_”
Indicates the selection of the F function enabling key and waits
for the user to enter the numerical value that corresponds to the
function to be performed.
4
P00=_
This appears only after a cancellation from memory or after the
Incoherent parameter condition procedure triggered by switch-on
has been quit and waits for the user to enter the numerical value
coherent with the type of product application.
5
Inch. On
Inch. OFF
These messages appear during the enabling or disabling of the
“F5”
function for the indication of the selection being made.
6
DIA. On
DIA. OFF
These messages appear during the enabling or disabling of the
“F7”
function for the indication of the selection being made.
7
DUAL. On
DUAL. OFF
These messages appear during the enabling or disabling of the
“F8”
function for the indication of the selection being made.
8
SER. On
(Optional)
SER. OFF
These messages appear during the enabling or disabling of the
“F9”
function in mode
"2"
of parameter
“P03”
for the indication
of the selection being made.
9
Batt. On
(Optional)
Batt. OFF
With the battery inserted option, whenever a power failure occurs
in the mains, the “Batt. On” message appears. This message
changes to “Batt. OFF” when mains power supply returns.
