SPACE 2000 (T and M versions) OPERATION MANUAL
33
ERROR MESSAGES
Error messages help the user establish the operating limits of the SPACE 2000 or
its anomalies.
N°
MESSAGE
MEANING
1
“Par. inc.”
A)
Indicates the presence of one or more incoherent parameters
if displayed when the equipment is switched on; in order to quit,
press the following key:
The SPACE 2000 sets the entire memory to zero and provides
the
P00=_
service message on the “X” display and waits for the
user to enter the value that corresponds to the application in use.
When the
P00
value is entered all the other parameters are
automatically set with the standard corresponding values (see
the M.P. table)
B)
This message appears during the normal writing of machine
parameters whenever the user enters a parameter value that is
incoherent with the system.
In this case, the message is shown for around 2 seconds and
then the incoherent parameter reappears for correction by the
user (see the description provided for the M.P.)
2
“Fun. inc.”
This message appears during the entry of a function value that is
incoherent with the system.
The control test is conducted when the
“Enter”
key is pressed
after the entry of the numerical value.
The message is shown for around 2 seconds and then the
incoherent function reappears for correction of the value by the
user.
3
“For. inc.”
This message appears during the entry of an absolute or relative
preset dimension that is not coherent with the display format set
previously by parameters
P12-P22-P32
.
The control test is conducted when the
“Enter”
key is pressed
after the entry of the numerical value.
The message is shown for around 2 seconds and then the
incoherent dimension reappears for the correction of the format
by the user.
C
L