Logenex
SCDM-SD Series Manual 1.0
8
1 Video Input
– Use the Scroll Up/Down button to select 1 Video Input.
Press the OK button to enter the 1 Video Input menu. Use the Scroll
Up/Down button to select the Video Input option: NTSC, PAL, ASI. The
factory default is NTSC. Press the OK button to set. If the modulator has
more than one video input scroll through the Advanced Menu for the
additional video input menus.
1 Program Num
– Use the Scroll Up/Down button to select 1 Program
Num. Press the OK button to enter the 1 Program Num menu. Use the
Scroll Up/Down button to select the desired 1 Program Num option
ranging from 0 to 65535 then press the OK button to set. Factory default
is 1001. If the modulator has more than one video input scroll through the
Advanced Menu for the additional Program Num menus.
1 Channel Name
– Use the Scroll Up/Down button to select 1 Channel
Name. Press the OK button to enter the 1 Channel Name menu. Use the
Scroll Up/Down menu to select the first character of the desired Channel
Name then press the OK button to set. Repeat the process until the
Channel Name is completed. If the modulator has more than one video
input scroll through the Advanced Menu for additional channel name
menus.
1 Aspect Ratio
– Use the Scroll Up/Down button to select 1 Aspect
Ratio. Press the OK button to enter the 1 Aspect Ratio menu. Use the
Scroll Up/Down button to select the desired Aspect Ratio option of 4:3 or
16:9 then press the OK button to set. Factory default is 4:3. If the
modulator has more than one video input scroll through the Advanced
Menu for additional Aspect Ratio menus.
To
exit the Advanced Menu
use the Scroll Up/Down button to select Exit then
press the OK button. Exit Exit Menu will appear on the LCD screen. Press the
OK button twice to exit.
Once the settings are made and the modulator is programmed (a) remove power
from the unit by disconnecting the power supply cable from the DC 12V jack, (b)
wait 5 seconds and (c) reconnect the power cable to the unit’s DC 12V jack. This
will allow the modulator to capture the new settings.
