12
•
Alarms:
you can set your device to push notifications to you via email or text message for three (3) different situations:
1)
If each measured parameters (like temperature) exceed or fall from a maximum or minimum defined thresholds.
2)
If server does not receive any uploads for a certain defined time in minutes from your device.
3)
If an error code rise in the device. For example in case of low battery device will send error number 5. You can choose which error codes be pushed to you. Please read
"
error
”
chapter
of current user manual to learn more about meanings of each error code.
•
Installation location:
It will help you to locate your device if necessary.
•
Wi-Fi settings:
You can see the name of the Wi-Fi that your bun is connected to. Also you can set a password for open setup network
name “bun hygro” so nobody else can trigger your
device with a magnet and change the setup.
Note
:
You can always change Wi-Fi settings in your device by triggering
“setup”
mode as well by hovering a magnet for three (3) or more continuous seconds over magnet sensor
(same as first time activation procedure).
•
Reading and uploading intervals.
Note
:
Your devices battery life will be affected by intervals of read outs and uploads. Web application will show you the estimated battery life of the device based on your settings.
