12
•
Alarms:
you can set your device to
send
notifications to you via email or text message
at
three (3) different situations:
1)
If each
of
measured parameters (like temperature) exceed
s
or fall
s
from a maximum or minimum defined threshold.
2)
If server does not receive any uploads for a certain defined time
(
in minutes
)
from your device.
3)
If an error code
is sent to
the device. For example in case of low battery
,
the
device will send error number 5. Please read
"
error
”
chapter of current user manual to learn more about
meanings of each error code.
•
Installation location:
It will help you to locate your device if necessary.
•
Wi-Fi settings:
You can see the name of Wi-Fi that your
"
bun
"
is connected to. Also you can set a password for open setup network
name “bun hygro” so nobody else can trigger your
device with a magnet and change the setup.
Note
:
You can always change Wi-Fi settings in your device by triggering
“setup”
mode as well by hovering a magnet for three (3) or more continuous seconds over magnet
sensor
of the device
(same as first time activation procedure).
•
Reading and uploading intervals.
Note
:
Your device
'
s battery life will be affected by intervals of readouts and uploads.
LoggerMaster web-based application
will show you the estimated battery life of the device based
on your settings.
