10
1. Unscrew the battery door at the bottom of the 7-in-1 outdoor sensor using a screwdriver (not
included).
INSTALLING THE BATTERIES
7
3.1.1 INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Rain Collector Installation
1 Align
Lock grooves
2 Lock
3.1.2 INSTALL RECHARGEABLE BATTERIES
Step 1: Unscrew the battery door at bottom of unit and take
out the cable socket.
Step 2: Connect the Ni-MH rechargeable battery plug to the
socket.
Step 3: Make sure the red LED indicator on the back of the
sensor array is turn on and then begin flashing every 12
seconds.
Step 4: Adjust the cable and socket into shallow hole and put
the battery pack into the battery compartment.
2. Connect the cable of the rechargeable battery pack (included) to the cable located in the battery
compartment.
7
3.1.1 INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Rain Collector Installation
1 Align
Lock grooves
2 Lock
3.1.2 INSTALL RECHARGEABLE BATTERIES
Step 1: Unscrew the battery door at bottom of unit and take
out the cable socket.
Step 2: Connect the Ni-MH rechargeable battery plug to the
socket.
Step 3: Make sure the red LED indicator on the back of the
sensor array is turn on and then begin flashing every 12
seconds.
Step 4: Adjust the cable and socket into shallow hole and put
the battery pack into the battery compartment.
3. Adjust the connected cables so they fit comfortably in the compartment. Then, insert the battery
pack into the compartment.
7
3.1.1 INSTALL RAIN GAUGE FUNNEL
Install the rain gauge funnel and rotate clockwise to lock the funnel to the sensor array
Rain Collector Installation
1 Align
Lock grooves
2 Lock
3.1.2 INSTALL RECHARGEABLE BATTERIES
Step 1: Unscrew the battery door at bottom of unit and take
out the cable socket.
Step 2: Connect the Ni-MH rechargeable battery plug to the
socket.
Step 3: Make sure the red LED indicator on the back of the
sensor array is turn on and then begin flashing every 12
seconds.
Step 4: Adjust the cable and socket into shallow hole and put
the battery pack into the battery compartment.