33
Press the
“ADVANCED”
button at the top of web interface to enter the advance setting page, this page allows you to
set and view the calibration data of the console, as well as update the firmware version on PC/Mac web browser.
ADVANCE SETTING IN WEB INTERFACE
27
6.4
ADVANCE SETTING IN WEB INTERFACE
Press
"ADVANCED"
key at the top of web interface to enter the advance setting page, this page
allow you to set and view the calibration data of the console, as well as update the firmware
version on PC/Mac web browser.
SETUP
ADVANCED
Upload
Browse
Firmware version: 1.00
-560~ 560hpa / -16.54 ~ 16.54inHg / -420 ~ 420mmH
g
Setting Range:
Temperature
o
C
Outdoor
Indoor
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
Humidity %
Relative Pressure Of
fset:
Absolute Pressure Offset:
hpa
Range: -20 ~ 20%
(Default: 0.0)
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
Current offset: 0
(Default: 0)
Current offset: 0
(Default: 0)
Current offset: 0
Current offset: 0
Current offset: 0
Pressure
Range: -20.0 ~ 20.0
o
C
-36.0 ~ +36.0
o
F (Default: 0.0)
*UV gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.00
*Light gain:
Range: 0.01 ~ 10(Default: 1.00)
Current gain: 1.00
*PM2.5:
Range: -99 ~ 99(Default: 0)
Current offset: 0
*PM10:
Range: -99 ~ 99(Default: 0)
Current offset: 0
* Depends on the model
*Wind speed gain:
*Wind direction:
*Rain gain:
Range: 0.5 ~ 1.5(Default: 1.00)
Range: -90 ~ 90(Default:
0
o
)
Range: 0.5 ~ 1.5(Default: 1.00)
Current gain: 1.00
Current offset: +0
o
Current gain: 1.00
SETTINGS
Current firmware version
Press "SETUP" icon to
setup page
Select setting unit
In/Outdoor & CH 1~7
temperature calibration
section
Pressure calibration
section
The rain, wind speed, UV
and light calibration use gain
method. The wind direction
is +/- 90 offset
The PM2.5 and PM10 is
+/-99 offset
(PM2.5 /10 calibration
setting is for optional
sensor only)
The firmware update
function only available
in PC/Mac web browser
In/Outdoor & CH 1~7
humidity calibration
section
Select setting unit
Current offset value
is the value that you
set before to offset the
pressure reading
ADVANCED page
