11
NOTES:
*
Special function keys require ESC as the leading code. In the scan-
code mode, you can view the symbol of the special key or the hex
code equivalent of the special key. To view, simply press F7 to toggle
between symbol and hex modes.
*
Any given programmable location may be toggled between scan-code
mode and ASCII-code mode. Pressing the F8 key on the keyboard will
change the cell’s mode to scan-code mode. Pressing F9 on the
keyboard will change the cell’s mode to ASCII-code mode. Changing
modes in a cell that has been previously programmed will erase all the
information in that cell.
*
The complete standard 101 keyboard was duplicated on the KB3000
in the template file IBM101.TPL. If you have any problems programming
the KB3000 simply load the IBM101.TPL file and view the key in
question to see how it should look when programmed correctly.
*
To enter hex scan-codes directly, press ESC followed by the 2-digit
hex number. For example, to program the CTRL key press ESC followed
by 1D. The KB3 program will add the leading zero.
Summary of Contents for KB3000
Page 1: ...Model KB3000 Programmable Keypad 176 Programmable Keys USER MANUAL...
Page 25: ......
Page 26: ......
