Logic Controls KB3000, User Manual

12

SPECIAL FEATURES OF THE KB3000

Besides being able to program all keys of an IBM101 keyboard, the KB3000
has also incorporated three state-of-the-art features which will add flexibility
and functionality to the keypad.

INTER-STRING DELAY

This feature allows for a time delay(s) to be installed after a character(s)
has been inserted into a location.  To use this feature follow the steps
below:

1.

Enter the character(s) which will precede the delay.  For
example, ABC.

2.

Depress and hold the ALT key while pressing the letter D.  A time
delay screen will open asking for the amount of delay you require
(up to 240 seconds).  A square pixel will appear on the programming
line immediately following the last character typed.

3.

Type the next character(s), DEF.  You can use more than one
delay per location and the delay can have different times.

4.

Exit the KB3 program by pressing F10 followed by the letter Y.

5.

Press the location key where the time delay character has been
stored.  The monitor will display ABC immediately and following
the delay, that you programmed, DEF will be display on the monitor.

MULTI-LEVEL DEFINITION

This feature can increase the apparent number of programmable keys by
allowing you to program different levels into any location.  For every different
level you program you must select another key to be a “SHIFT LEVEL”
key.  Programming is accomplished in the normal manner.  After
programming the base level a separator bar must be entered to separate
the base level from the second level.  You can program more than two
levels per location.  For example, if you needed to program small, medium,
and large coffee into one key follow the procedure outlined on the following
page.